for GWR Churchward/Collett 2-8-0 28xx class at 1:32
Later series built 1938-1942. Driving with the gaps between the spokes filled in each side of the pin.
GWR locomotives could sometimes aquire different wheels from their originals. This pattern was made from dimensions taken from No. 2818 (an early loco) which in 2001 had later driving wheels with filled-in poke gaps each side of the pin and a much larger diameter hub.
A full set consists of 2 x P75 leading, 8 x P273 driving and 6 x P20 tender wheels.
Suitable for Gauge One Fine or Standard
The prototype driving wheel weights are surface mounted castings and are not cast in.