A model made up from one of
Fred Phipps kits.

Kits from:
Fred Phipps/Carradoc Models,
15 Silverbirch Walk,
Maitland Park Road,
London NW3 2HH.
Tel: 0207 2677527,
Fax: 0208 2090808.
e-mail: caradocmodels@hotmail.com

[Photo of model]
Home

BR sets, price list 		CAST IRON WHEEL CASTINGS
for BR class 21/29 and 22 Diesels at 32:1 		Full size for 85 dpi screens
Price and dimensions: P93

Stock: P93

Turning diagram: P93

[Scan of castings]

 [Scan of castings] This set is turned to near dead-scale flange profile and 4.5 mm tyre width.

My track testing vehicle is about 2 feet long and has no vertical wheel movement. It is now changed to this dead scale profile and runs well on my outdoor layout so in future I will use it instead of Gauge One Fine.
A full set of 8 of P93 castings is £95.20 plus £4.50 special delivery.
Suitable for Gauge One Fine or Standard
The patterns were made from original works drawings.

TURNED SETS, insulated one side and mounted on telescopic axles are £160.96 per set of 4 pairs plus £5.70 special delivery.

Deduct £5.56 if no insulation is required.

CHOOSE: Gauge One Fine, 42 mm back to back with 1.5 mm deep flange,
or Gauge One Standard, 40 mm back to back with 1.5 or 2.0 mm deep flanges
or dead scale as in the image above to your choice of back to back.
Note: Prototype 5½″ tyre width and back to back of 4′ 5 ⅝″ = 4.4 mm and 42.56 mm.